Posted : Thursday, February 22, 2024 03:26 AM
SLAC Job Postings
SLAC National Accelerator Laboratory is seeking an Accelerator Systems Operator II in the Accelerator Operations and Safety Division (AOSD) in the Accelerator Directorate (AD).
This position reports to the department head for the accelerator operators.
Beam operation tasks include, but are not limited to: Search, secure, and monitor controlled access of PPS areas, check PPS interlocks, safety items and perform routine beam containment safety system checks.
Ensure compliance with safety rules and procedures.
Setup, recover and optimize the performance of accelerator systems after short periods of inattention or short downtimes using standard tuning techniques.
Measure beam emittance, energy and energy spread using standard diagnostic tools and correct above parameters using standard techniques.
Able to do standard beta and eta matching.
Identify and diagnose standard component failures to the software or hardware module level and give precise failure mode information to the senior operations or maintenance staff.
Examples of component level hardware failures include: out of tolerance amplitude regulation of magnet or klystrons, incorrect trigger timing or phase for pulsed devices, BPM module or cable failures and temperature regulation or readout for a water-cooled device.
Provide guidance to lower level operators and assist in their training.
Determine parameters that need to be measured and obtain correlation plot data in an optimal manner.
Identify specific accelerator system performance trends using system history buffers and history buffer correlation.
Document and act to correct or report substandard performance.
Diagnose and determine failures of all standard CAMAC modules.
Phase and gold klystrons Measure and correct kicker timing Measure and correct BPM timing Identify magnet calibration and standardization problems All ASO-I tasks Non-beam operation related tasks include: Maintain training requirements for current level.
Draft Operations documentation.
Perform operational equipment checks.
Program software.
Work with Accelerator Operations, and other SLAC groups on equipment fabrication, repair, modification, installation, and removal.
* - Other duties may also be assigned To be successful in this position you will bring: Bachelor’s degree in physics or engineering with physics coursework and two years of experience as an Accelerator Systems Operator, or a combination of education and relevant experience.
Completion of ASO-II training program Ability to work independently as a skilled Accelerator Systems Operator, typically gained through substantial experience as an Accelerator System Operator I.
Familiarity with the physics theory which underlies the performance of the system, such as an understanding of emittance, dispersion, resonance diagrams, and feedback systems.
Ability to document experimental data as required in a standardized and readily understood fashion.
Technical skills for trouble-shooting accelerator problems, including electronics and control systems.
Demonstrated ability to initiate projects, develop skills, and work in a team environment under limited supervision.
Must have excellent verbal and written communication skills using various communication systems.
Must possess a valid driver’s license to drive vehicles on site.
Must be physically capable of climbing tall ladders, maneuvering over, under, and around tight spaces, beamlines, large magnets, and other accelerator devices to clear tunnels of personnel.
This position will require additional safety training to support these activities.
Ability to work a non-standard schedule and extended shifts.
Operators rotate though day, swing and owl shifts, including weekends, when the accelerators are operating.
In addition, preferred requirements include: Demonstrated experience solving technical problems using diagnostic tools, scientific data analysis applications, and computer control system software in a scientific or industry laboratory setting is desirable.
Computer programming coursework or experience is desirable.
SLAC Employee Competencies: Effective Decisions: Uses job knowledge and solid judgment to make quality decisions in a timely manner.
Self-Development: Pursues a variety of venues and opportunities to continue learning and developing.
Dependability: Can be counted on to deliver results with a sense of personal responsibility for expected outcomes.
Initiative: Pursues work and interactions proactively with optimism, positive energy, and motivation to move things forward.
Adaptability: Flexes as needed when change occurs, maintains an open outlook while adjusting and accommodating changes.
Communication: Ensures effective information flow to various audiences and creates and delivers clear, appropriate written, spoken, presented messages.
Relationships: Builds relationships to foster trust, collaboration, and a positive climate to achieve common goals.
Physical requirements and Working conditions: Consistent with its obligations under the law, the University will provide reasonable accommodation to any employee with a disability who requires accommodation to perform the essential functions of his or her job.
WORK STANDARDS: Interpersonal Skills: Demonstrates the ability to work well with Stanford colleagues and clients and with external organizations.
Promote Culture of Safety: Demonstrates commitment to personal responsibility and value for environment, safety and security; communicates related concerns; uses and promotes safe behaviors based on training and lessons learned.
Meets the applicable roles and responsibilities as described in the ESH Manual, Chapter 1—General Policy and Responsibilities: Subject to and expected to comply with all applicable University policies and procedures, including but not limited to the personnel policies and other policies found in the University's Administrative Guide, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Classification Title: Accelerator System Operator II Grade: A37, Job code: 6720 Please note: This position is represented by SEIU Local 2007 and the collective bargaining agreement between the university and SEIU Local 2007 governs the terms and conditions of employment.
The expected pay range for this position is $48.
04 (Step 1) - $58.
11 (Step 10) per hour.
Placement in the range is subject to the applicable Collective Bargaining Unit.
SLAC National Accelerator Laboratory/Stanford University provides pay ranges representing its good faith estimate of what the university reasonably expects to pay for a position.
The pay offered to a selected candidate will be determined based on factors such as (but not limited to) the scope and responsibilities of the position, the qualifications of the selected candidate, departmental budget availability, internal equity, geographic location and external market pay for comparable jobs.
This position reports to the department head for the accelerator operators.
Beam operation tasks include, but are not limited to: Search, secure, and monitor controlled access of PPS areas, check PPS interlocks, safety items and perform routine beam containment safety system checks.
Ensure compliance with safety rules and procedures.
Setup, recover and optimize the performance of accelerator systems after short periods of inattention or short downtimes using standard tuning techniques.
Measure beam emittance, energy and energy spread using standard diagnostic tools and correct above parameters using standard techniques.
Able to do standard beta and eta matching.
Identify and diagnose standard component failures to the software or hardware module level and give precise failure mode information to the senior operations or maintenance staff.
Examples of component level hardware failures include: out of tolerance amplitude regulation of magnet or klystrons, incorrect trigger timing or phase for pulsed devices, BPM module or cable failures and temperature regulation or readout for a water-cooled device.
Provide guidance to lower level operators and assist in their training.
Determine parameters that need to be measured and obtain correlation plot data in an optimal manner.
Identify specific accelerator system performance trends using system history buffers and history buffer correlation.
Document and act to correct or report substandard performance.
Diagnose and determine failures of all standard CAMAC modules.
Phase and gold klystrons Measure and correct kicker timing Measure and correct BPM timing Identify magnet calibration and standardization problems All ASO-I tasks Non-beam operation related tasks include: Maintain training requirements for current level.
Draft Operations documentation.
Perform operational equipment checks.
Program software.
Work with Accelerator Operations, and other SLAC groups on equipment fabrication, repair, modification, installation, and removal.
* - Other duties may also be assigned To be successful in this position you will bring: Bachelor’s degree in physics or engineering with physics coursework and two years of experience as an Accelerator Systems Operator, or a combination of education and relevant experience.
Completion of ASO-II training program Ability to work independently as a skilled Accelerator Systems Operator, typically gained through substantial experience as an Accelerator System Operator I.
Familiarity with the physics theory which underlies the performance of the system, such as an understanding of emittance, dispersion, resonance diagrams, and feedback systems.
Ability to document experimental data as required in a standardized and readily understood fashion.
Technical skills for trouble-shooting accelerator problems, including electronics and control systems.
Demonstrated ability to initiate projects, develop skills, and work in a team environment under limited supervision.
Must have excellent verbal and written communication skills using various communication systems.
Must possess a valid driver’s license to drive vehicles on site.
Must be physically capable of climbing tall ladders, maneuvering over, under, and around tight spaces, beamlines, large magnets, and other accelerator devices to clear tunnels of personnel.
This position will require additional safety training to support these activities.
Ability to work a non-standard schedule and extended shifts.
Operators rotate though day, swing and owl shifts, including weekends, when the accelerators are operating.
In addition, preferred requirements include: Demonstrated experience solving technical problems using diagnostic tools, scientific data analysis applications, and computer control system software in a scientific or industry laboratory setting is desirable.
Computer programming coursework or experience is desirable.
SLAC Employee Competencies: Effective Decisions: Uses job knowledge and solid judgment to make quality decisions in a timely manner.
Self-Development: Pursues a variety of venues and opportunities to continue learning and developing.
Dependability: Can be counted on to deliver results with a sense of personal responsibility for expected outcomes.
Initiative: Pursues work and interactions proactively with optimism, positive energy, and motivation to move things forward.
Adaptability: Flexes as needed when change occurs, maintains an open outlook while adjusting and accommodating changes.
Communication: Ensures effective information flow to various audiences and creates and delivers clear, appropriate written, spoken, presented messages.
Relationships: Builds relationships to foster trust, collaboration, and a positive climate to achieve common goals.
Physical requirements and Working conditions: Consistent with its obligations under the law, the University will provide reasonable accommodation to any employee with a disability who requires accommodation to perform the essential functions of his or her job.
WORK STANDARDS: Interpersonal Skills: Demonstrates the ability to work well with Stanford colleagues and clients and with external organizations.
Promote Culture of Safety: Demonstrates commitment to personal responsibility and value for environment, safety and security; communicates related concerns; uses and promotes safe behaviors based on training and lessons learned.
Meets the applicable roles and responsibilities as described in the ESH Manual, Chapter 1—General Policy and Responsibilities: Subject to and expected to comply with all applicable University policies and procedures, including but not limited to the personnel policies and other policies found in the University's Administrative Guide, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Classification Title: Accelerator System Operator II Grade: A37, Job code: 6720 Please note: This position is represented by SEIU Local 2007 and the collective bargaining agreement between the university and SEIU Local 2007 governs the terms and conditions of employment.
The expected pay range for this position is $48.
04 (Step 1) - $58.
11 (Step 10) per hour.
Placement in the range is subject to the applicable Collective Bargaining Unit.
SLAC National Accelerator Laboratory/Stanford University provides pay ranges representing its good faith estimate of what the university reasonably expects to pay for a position.
The pay offered to a selected candidate will be determined based on factors such as (but not limited to) the scope and responsibilities of the position, the qualifications of the selected candidate, departmental budget availability, internal equity, geographic location and external market pay for comparable jobs.
• Phone : NA
• Location : 2575 Sand Hill Rd, Menlo Park, CA
• Post ID: 9058547989